1. The kit comprises two 355mm lengths of 12mm all thread, 4 x 12mm nuts, 2 washers, 2 x 200mm x 60mm steel plates, 2 white acetyl bolt protectors and nut caps.
2. Establish the position of the fixing bolts from the data sheets for the wall hung pan. Mark the hole positions on the wall above the finished floor level at the correct height and spacing for the pan selected, and drill through for 12mm all thread.
3. Insert the two 355mm all threads through the wall, allowing sufficient thread to go through the china plus the fixing nut. Place a plate and fixing nut onto each all thread.
4. Hang the pan onto the projecting all thread, then insert the acetyl bolt protector through the china, and add each washer and fixing nut. Do not over tighten. Cover the nut with the cap provided.

Specification: Order kit code IM5920